Exabeam destination plugin
The Exabeam destination plugin lets you configure your Telemetry Pipeline to output data to Exabeam.
Configuration parameters
The Exabeam destination plugin provides these configuration parameters. Items in the Name column display in the Calyptia Dashboard. Items in the Key column are the YAML keys to use in pipeline configuration files.
General
| Name | Key | Description | Default |
|---|---|---|---|
| Host | host | Required. IP address or hostname of the target service. | 127.0.0.1 |
| Port | port | Required. TCP port of the target service. | 80 |
| Format | format | Required. Specify the data format to be printed. Supported formats: msgpack, json, json_lines, and json_stream. | msgpack |
Advanced
| Name | Key | Description | Default |
|---|---|---|---|
| JSON Date Format | json_date_format | Specify the format of the date. Supported formats: double, epoch, iso8601, java_sql_timestamp. | none |
| JSON Date Key | json_date_key_ | Specify the name of the time key in the output record. To disable the time key set the value to false. | none |
| Raw Message Key | raw_message_key | Specify a key to contains the message to send in raw format. | none |
Security and TLS
| Name | Key | Description | Default |
|---|---|---|---|
| TLS | tls | Enable or disable TLS/SSL support. | none |
| TLS Certificate Validation | tls.verify | Turn TLS/SSL certificate validation on or off. TLS must be on for this setting to be enabled. | on |
| TLS Debug Level | tls.debug | Set TLS debug verbosity level. Accepted values: 0 (No debug), 1 (Error), 2 (State change), 3 (Informational), 4 (Verbose). | 1 |
| CA Certificate File Path | tls.ca_file | Absolute path to CA certificate file. | none |
| Certificate File Path | tls.crt_file | Absolute path to certificate file. | none |
| Private Key File Path | tls.key_file | Absolute path to private key file. | none |
| Private Key Path Password | tls.key_passwd | Optional password for tls.key_file file. | none |
| TLS SNI Hostname Extension | tls.vhost | Hostname to be used for TLS SNI extension. | none |
Advanced Networking
| Name | Key | Description | Default |
|---|---|---|---|
| DNS Mode | net.dns.mode | Select the primary DNS connection type, which can be TCP or UDP. | none |
| DNS Resolver | net.dns.resolver | Select the primary DNS connection type, which can be LEGACY or ASYNC. | none |
| Prefer IPv4 | net.dns.prefer_ipv4 | Prioritize IPv4 DNS results when trying to establish a connection. Valid values are true or false. | none |
| Keepalive | net.keepalive | Enable or disable Keepalive support. Valid values are true or false. | true |
| Keepalive Idle Timeout | net.keepalive_idle_timeout | Set maximum time allowed for an idle Keepalive connection. | 30s |
| Max Connect Timeout | net.connect_timeout | Set maximum time allowed to establish a connection, which includes the TLS handshake. | 10s |
| Max Connect Timeout Log Error | net.connect_timeout_log_error | On connection timeout, specify if it should log an error. When disabled, the timeout is logged as a debug message. Valid values are true or false. | true |
| Max Keepalive Recycle | net.keepalive_max_recycle | Set maximum number of times a keepalive connection can be used before it is retired. | 2000 |
| Source Address | net.source_address | Specify network address to bind for data traffic. | none |