Greylog DataSet destination plugin
The Greylog destination plugin lets you send Chronosphere Telemetry Pipeline data to Greylog.
Supported telemetry types
This plugin supports these telemetry types:
Logs | Metrics | Traces |
---|---|---|
Configuration parameters
Use the parameters in this section to configure your plugin. The Telemetry Pipeline web interface uses the values in the Name column to describe the parameters. Items in the Key column are the YAML keys to use in pipeline configuration files.
General
Name | Key | Description | Default |
---|---|---|---|
Host | Host | IP address or hostname of the target Graylog server. | 127.0.0.1 |
Port | Port | The port that your Graylog GELF input is listening on. | 12201 |
Mode | Mode | The protocol to use (tls , tcp or udp ). | udp |
Packet Size | Packet_Size | If mode is udp , set the size of packets to be sent. | 1420 |
Compress | Compress | If true , and mode is udp , compress your UDP packets. Accepted values: true , false . | true |
GELF settings
Name | Key | Description | Default |
---|---|---|---|
GELF Short Message Key | Gelf_Short_Message_Key | A short descriptive message (must be set in GELF). | short_message |
GELF Timestamp Key | Gelf_Timestamp_Key | Your log timestamp (should be set in GELF). | timestamp |
GELF Host Key | Gelf_Host_Key | This key value is used as the name of the host, source, or application that sent this message. (must be set in GELF). | host |
GELF Full Message Key | Gelf_Full_Message_Key | Key to use as the long message. (Optional in GELF). | none |
GELF Level Key | Gelf_Level_Key | Key to be used as the log level. Its value must be in standard syslog levels between 0 and 7. (Optional in GELF). | none |
Security and TLS
Name | Key | Description | Default |
---|---|---|---|
TLS | tls | Enable or disable TLS/SSL support. Accepted values: true , false . | false |
TLS Certificate Validation | tls.verify | Enable or disable TLS/SSL certificate validation. TLS must be enabled for certificates to be validated. Accepted values: off , on . | on |
TLS Debug Level | tls.debug | Set TLS debug verbosity level. Accepted values: 0 (No debug), 1 (Error), 2 (State change), 3 (Informational), 4 (Verbose). | 1 |
CA Certificate File Path | tls.ca_file | Absolute path to CA certificate file. | none |
Certificate File Path | tls.crt_file | Absolute path to certificate file. | none |
Private Key File Path | tls.key_file | Absolute path to private key file. | none |
Private Key Path Password | tls.key_passwd | Password for private key file. | none |
TLS SNI Hostname Extension | tls.vhost | Hostname to be used for TLS SNI extension. | none |
Advanced Networking
Name | Key | Description | Default |
---|---|---|---|
DNS Mode | net.dns.mode | Select the primary DNS connection type, which can be TCP or UDP . | none |
DNS Resolver | net.dns.resolver | Select the primary DNS connection type, which can be LEGACY or ASYNC . | none |
Prefer IPv4 | net.dns.prefer_ipv4 | Prioritize IPv4 DNS results when trying to establish a connection. Accepted values: true , false . | false |
Keepalive | net.keepalive | Enable or disable Keepalive support. Accepted values: true , false . | true |
Keepalive Idle Timeout | net.keepalive_idle_timeout | Set maximum time allowed for an idle Keepalive connection. | 30s |
Max Connect Timeout | net.connect_timeout | Set maximum time allowed to establish a connection, which includes the TLS handshake. | 10s |
Max Connect Timeout Log Error | net.connect_timeout_log_error | On connection timeout, specify if it should log an error. When disabled, the timeout is logged as a debug message. Accepted values: true , false . | true |
Max Keepalive Recycle | net.keepalive_max_recycle | Set maximum number of times a keepalive connection can be used before it's retired. | 2000 |
Source Address | net.source_address | Specify network address to bind for data traffic. | none |