TCP destination plugin
The TCP destination plugin lets you configure Chronosphere Telemetry Pipeline to send your data to a remote TCP endpoint, letting you integrate your telemetry data with other systems or services for various purposes.
Supported telemetry types
This plugin supports these telemetry types:
| Logs | Metrics | Traces |
|---|---|---|
Configuration parameters
Use the parameters in this section to configure your plugin. The Telemetry Pipeline web interface uses the values in the Name column to describe the parameters. Items in the Key column are the YAML keys to use in pipeline configuration files.
General
| Name | Key | Description | Default |
|---|---|---|---|
| Host | host | Required. IP address or hostname of the target service. | 127.0.0.1 |
| Port | port | Required. TCP port of the target service. | 80 |
| Format | format | Required. Sets the format. Accepted values: json, json_lines, json_stream, mspgack. | msgpack |
Advanced
| Name | Key | Description | Default |
|---|---|---|---|
| JSON Date Format | json_date_format | Specifies the format of the date. Accepted values: double, epoch, iso8601 (for example, 2018-05-30T09:39:52.000681Z) java_sql_timestamp (for example, 2018-05-30 09:39:52.000681). | none |
| JSON Date Key | json_date_key | Specifies the name of the time key in the output record. To disable the time key, set the value to false. | none |
| Raw Message Key | raw_message_key | Specifies the key that contains the message to send in raw format. For example, log key. | none |
Security and TLS
| Name | Key | Description | Default |
|---|---|---|---|
| TLS | tls | Enables or disables TLS/SSL support. Accepted values: true, false. | false |
| TLS Certificate Validation | tls.verify | Enables or disables TLS/SSL certificate validation. TLS must be enabled for certificates to be validated. Accepted values: off, on. | on |
| TLS Debug Level | tls.debug | Sets TLS debug verbosity level. Accepted values: 0 (No debug), 1 (Error), 2 (State change), 3 (Informational), 4 (Verbose). | 1 |
| CA Certificate File Path | tls.ca_file | Absolute path to CA certificate file. | none |
| Certificate File Path | tls.crt_file | Absolute path to certificate file. | none |
| Private Key File Path | tls.key_file | Absolute path to private key file. | none |
| Private Key Path Password | tls.key_passwd | Password for private key file. | none |
| TLS SNI Hostname Extension | tls.vhost | Hostname to be used for TLS SNI extension. | none |
Advanced Networking
| Name | Key | Description | Default |
|---|---|---|---|
| DNS Mode | net.dns.mode | Selects the primary DNS connection type, which can be TCP or UDP. | none |
| DNS Resolver | net.dns.resolver | Selects the primary DNS connection type, which can be LEGACY or ASYNC. | none |
| Prefer IPv4 | net.dns.prefer_ipv4 | Prioritizes IPv4 DNS results when trying to establish a connection. Accepted values: true, false. | false |
| Keepalive | net.keepalive | Enables or disables Keepalive support. Accepted values: true, false. | true |
| Keepalive Idle Timeout | net.keepalive_idle_timeout | Sets the maximum time allowed for an idle Keepalive connection. | 30s |
| Max Connect Timeout | net.connect_timeout | Sets the maximum time allowed to establish a connection, which includes the TLS handshake. | 10s |
| Max Connect Timeout Log Error | net.connect_timeout_log_error | Specifies whether to log an error on connection timeout. When disabled, the timeout is logged as a debug message. Accepted values: true, false. | true |
| Max Keepalive Recycle | net.keepalive_max_recycle | Sets the maximum number of times a keepalive connection can be used before it's retired. | 2000 |
| Source Address | net.source_address | Specifies the network address to bind for data traffic. | none |